Tii Fiber Optics Catalog
FIBER INTERFACE DEVICES / SLACK STORAGE TERMINALS 12 www.tiitech.com FIBER INTERFACE DEVICES/SLACK STORAGE UNITS Fiber Interface Device/Slack Storage Units are compact units which feature SC connectivity between the OSP fiber drop and customer fiber drop, as well as slack storage. Enclosures are available in a variety of sizes to accommodate up to 12 fiber terminations and installation locations. FIBER ADAPTER PLATE SERIES - SINGLE AND 6 PORT The FP01 & FP02 Series are single and 6 port fiber adapter plates that snap into Tii’s 169F, 171F, 506F, 507F, 508F, 509F and OD-ONT-ENC Series Fiber Enclosures. The fiber plate functions as a demarcation point for the incoming fiber drop and distribution out to the customer. 169F -XX -XX ADAPTER TYPE NO. OF PORTS 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 03 = 4 Dimensions (height x width x depth): 6.11” x 4.33” x 2.15” (15.5 cm x 11.0 cm x 5.5 cm) Up to 4 fibers, indoor or outdoor 171F -XX -X -XX -X -X *ADAPTER MOUNTING OPTIONS MIDDLE PLATE FORPOWER CONNECTIONS GROUND STUD SPLIT RATIO SPLITTER QTY. 00 = No FP Plate, No Adapters 01 = FP Plate, No Adapters U1 = One SC UPC Adapters on FP01 Plate U2 = Two SC UPC Adapters on FP01 Plate A1 = One SC APC Adapters on FP01 Plate A2 = Two SC APC Adapters on FP01 Plate 0 = None 1 = Middle Plate 0 =None 1 =Ground Stud 0 = None 1 = 1x8 4 = 1x4 0-2 Dimensions (height x width x depth): 6.67” x 6.56” x 2.87” (16.94 cm x 16.66 cm x 7.29 cm) Terminates Up to Two Single-Fiber Cables (Four with LC) Optional Copper Connectivity Interface for Small Cells, DAS, or G.fast *please contact customer service for LC model number FP XX -XX -XX Series Adapter Type Number of Ports 01 = Single Port 02 = 6 Port 01 = SC-APC 02 = SC-UPC 01 = 1 02 = 2 04 = 4 06 = 6 (FP02 series only) FP01 Dimensions (height x width x depth): 4.23” x 3.60” x 1.50” (10.74 cm x 9.14 cm x 3.81 cm) FP02 Dimensions (height x width x depth): 2.01” x 3.58” x 1.71” (5.11 cm x 9.09 cm x 4.34 cm) Reeled Customer Distribution Fiber Allows for Fast Deployment 506R -XX -XX -XX -XXX -X X -XX HOUSING CABLE TYPE ADAPTER TYPE ADAPTER QTY LENGTH IN FT CONFIGURATION OPTIONS GROMMETS (OPTIONAL) OPTIONAL PRE-PEEL K9 = MicroDrop 01 = SC-APC 02 = SC-UPC 03 = LC-APC 04 = LC-UPC 01 = 1 025 050 075 100 125 N = None C = Cable Entry Clamp E = External Ground D = External Ground and Cable Entry Clamp Installed Blank = 2 Standard Grommets C = 2 Conduit Grommets G = 1 Standard Grommet, 1 Conduit Grommets Blank = No Pre-Peel, No Pull Sock PE = No Pre-Peel, with Pull Sock 01 = ¼”of Peel Exposed with No Pull Sock 02 = ¼”of Peel Exposed with Pull Sock
Made with FlippingBook
RkJQdWJsaXNoZXIy ODMzODI=