Tii Communication Products Catalog

OSP CONNECTOR BLOCKS CONNECTIVITY PRODUCTS 888.844.4720 112 DVC-4 SERIES – FOUR LINE DIGITAL VOICE CONNECTOR The DVC-4, four line digital voice connector distributes EMTA connections to customer’s telephone lines through sealed IDC rocker assemblies. The module comes equipped with an RJ-31X jack that provides a series connection to the tip and ring conductors of line one. The jack is wired ahead of all station equipment electrically and is typically used with registered alarm-reporting devices. When an alarm condition occurs, the RJ-31X functions to cut off all station equipment wired into the home or business. ORDERING INFORMATION - CALL FOR PRICING & AVAILABILITY MODEL NO. DESCRIPTION DVC-4 Four Line Digital Voice Connector DVC-4-X Four Line Digital Voice Connector without RJ-31X DIMENSIONS Dimensions (height x width x depth): 3.23” x 3.10” x 1.48” (8.2cm x 7.9 cm x 3.8 cm) 160 SERIES – WIRE TERMINAL ENCLOSURE The 160G Indoor/Outdoor Wire Terminal Enclosure shields one or two Tii Total Failsafe® (TFS®) Protector Modules or other electronic devices from most environmental conditions. It has a mounting base, a flexible grommet and a fitted flange cover that snaps tightly closed. ORDERING INFORMATION - CALL FOR PRICING & AVAILABILITY MODEL NO. DESCRIPTION 160G Indoor/Outdoor Enclosure with Grommet 160GS Indoor/Outdoor Enclosure with Grommet and Ground Stud DIMENSIONS Dimensions (height x width x depth): 4.18” x 3.25” x 1.87” (10.6cm x 8.3 cm x 4.7 cm) 163 SERIES – WIRE TERMINAL ENCLOSURES 163 Series Wire Terminal Enclosures are used to connect drop wire and bridle wire for aerial wire drops. ORDERING INFORMATION MODEL NO. DESCRIPTION 163-01 Two-Pair Wire Terminal Box (Four #10 studs for terminating two pairs.) 163-02 Two-Pair Wire Terminal with Ground (Four studs with ground stud for two pair and ground.) 163-03 One-Pair Wire Terminal Box (Two #10 studs for terminating one pair.) 163-04 One-Pair Wire Terminal with Ground (Two studs with ground stud for one pair and a ground.) 163-05 Two-Pair Wire Terminal Box (Four #10 studs with three additional washers and one additional hex nut on each stud/ground.) 163-06* Two-Pair Wire Terminal Box (Four #10 studs with ground stud with three additional washers and one additional hex nut on each stud/ground) *Stock Item. Call for pricing & availability for other configurations. Note: 163-01, 163-02, 163-03 and 163-04 come equipped with three washers and one hex nut on each stud/ground. 163-01 and 163-03 Wire Terminals have enough room to mount a one-pair load coil or build-out capacitor in order to condition transmission characteristics of the circuit. DIMENSIONS Dimensions (height x width x depth): 4.18” x 3.25” x 1.87” (10.6cm x 8.3 cm x 4.7 cm) WIRE TERMINALS