tii


 

Fiber - ONT Installation Accessories


Tii's family of fiber optic products are designed to provide cable management and connectivity between the OSP fiber drop and customer fiber drop.

FMC Series - Structured Wire Flush Mount Closures

Tii Flush Mount Closures provide an ideal solution to centrally locate equipment used to deliver voice, data, video, audio or wireless services at the premise. Manufactured from high performance engineering thermoplastic that will not impede RF signals where wireless networks are deployed. Provides ease of installation and efficient organization of ONTs, battery back-up and residential gateways. Modular design and rear mounting pattern give a wide latitude for hardware locations with ample ventilation to keep equipment cool. 180 degree hinged cover allows for quick and easy access to network equipment which can be mounted in multiple locations by means of Velcro straps, shelving support clips and other cable management components (Accessory Kit FMC-A1).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

ONT-PWRDIN-U - Universal Mounting Power Module

Power Module with DIN Connector Output, Two DC Power Inputs and One Alarm Input. Designed to conveniently field terminate power and alarm conductors during installation of desk top ONTs and power adapters.

AdobePDF.jpg read more (PDF)

OD-ONT-ENC - Outdoor Optical Network Terminal Enclosure with Slack Storage

The OD-ONT-ENC is a high performance Outdoor ONT Enclosure designed to house the components of a typical Fiber To The Home installation including an Optical Network Terminal, Tii's ONT-PWRDIN-U Power Connector, 62-2 Connectivity Block and 61-1-45 CAT5e block which terminates Ethernet connections to the ONT. Designed to mount to a wall, or directly on top of an optional slack storage enclosure, the OD-ONT-SSENC which accommodates up to 75 feet of fiber. An optional cover is available for standalone slack storage applications. These rugged enclosures are constructed of superior materials capable of withstanding harsh outdoor environments including UV degradation, rain, snow, chemical exposure, and extreme temperatures. It is designed to protect an active ONT from the outdoor elements, in particular water and dust.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg OD-ONT-ENC Install Note (PDF)
AdobePDF.jpg OD-ONT-SSENC Install Note (PDF)

ONT-ENC - Optical Network Terminal Enclosure with Slack Storage

The ONT-ENC is an indoor enclosure designed to hold the components of a typical Fiber to the Home installation including Indoor Optical Network Terminal, Power Adapter, and Tii's 68M-2-2T Connectivity Block. It is designed to mount to a wall, or directly on top of an optional slack storage enclosure, Tii model ONT-SSENC1. The enclosure provides a flexible component mounting scheme to support a variety of ONTs and Power Adapters, and is designed to ensure a proper thermal environment for active components using vents and spacing for ample airflow. An adjustable mechanism is provided to allow mounting of any future ONT up to 9 x 9 x 2.5 inches. The enclosure provides integrated cable management and strain relief features for interior and exterior cables.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg ONT-ENC Install Note (PDF)
AdobePDF.jpg ONT-SSENC1 Install Note (PDF)

ONT-SU - Optical Network Terminal Storage Unit

The ONT-SU is designed to securely consolidate and organize key Fiber To The Home components. Its unique design offers a compact solution to install a wide variety of ONTs, routers and UPS devices into or on top of the unit at the customer premise.

AdobePDF.jpg read more (PDF)

ONT-SE1 - Optical Network Terminal Slack Storage Enclosure

The ONT-SE1 is an indoor/outdoor slack storage enclosure which can accommodate up to 50 ft. of flat drop fiber with adjustable fiber retention fingers. This unit ships with hardware necessary to mount several industry standard indoor and outdoor ONTs on the removable front cover which is secured with four screws. Includes mounting provisions for Tii's FP Series adapter plate (not included) which can be used to configure up to 12 fiber terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FAT1 Series - Fiber Access Termination Unit

The FAT 1 Series is a compact, outdoor wall mount fiber termination and distribution enclosure. This unit is typically used as an Optical Demarcation Point.

AdobePDF.jpg read more (PDF)

VIS-4 - Voice Intercom Switch With Dial Down Feature

The VIS-4 Voice Intercom Switch is a microprocessor controlled circuit that provides seamless connection of customer premise telephones to either a digital voice service or to door answering systems (DAS)/intercom calls in multiple dwelling units (MDUs).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

VIS-3 - Voice Intercom Switch

VIS-3 Voice Intercom Switch is a microprocessor controlled circuit that provides seamless connection of customer premise telephones to either a digital voice service or to door answering systems (DAS)/intercom calls in multiple dwelling units (MDUs).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

ONT-SS - Optical Network Terminal Storage Shelf

The ONT-SS is designed to securely consolidate key fiber to the home components. Its unique design offers a compact solution to install a wide variety of ONTs, routers and battery back-ups, onto a shelf at the customer premise where space is often limited.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

442CSE - ONT Grounding Module for Coax Utilizing Two Prong Polarized AC Outlet

The 442CSE Grounding Module detects the presence of AC power and ground. It also provides an auxiliary AC receptacle and grounding connection through the ground tab. Two F-type female connectors provide the means of grounding the coax cable shield as well as signal integrity. The 442CSE is designed with a side entry AC outlet and grounding for easy access to the unit.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg 442 Series Grounding Modules Comparison Flyer (PDF)

CPR - Fiber Optic 1x2 Coupler/Splitter

The CPR is a singlemode 1x2 fused bionic tapered bidirectional coupler/splitter. It is ideally suited for telecommunications, network monitoring and FTTx applications.

AdobePDF.jpg read more (PDF)

VIS-2 - Voice Intercom Switch with Porting Switch

The VIS-2 Voice Intercom Switch provides number porting and seamless connection of customer premise telephones to either a digital voice service or to door answering systems (DAS)/intercom calls in multiple dwelling units (MDUs).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2017 Tii Technologies Inc. All Rights Reserved