tii


 

Fiber - OSP Fiber Enclosures


Tii's Fiber Interface Device (FID) is a compact enclosure which is designed to provide a demarcation and transition point between fiber drop cable and the customer premise fiber cable.

171F - Fiber Transition Enclosure

The 171F is a compact enclosure which is designed to provide a demarcation and transition point between fiber drops and downstream devices. Its optional copper connectivity makes it an ideal device for interfacing to the Customer Premise, Small Cells, DAS, or G.fast modem devices.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FP02 Series - 6 Port Fiber Adapter Plate

FP02 Series 6 port fiber adapter plates snap into 169F, 506F and 507F Series fiber enclosures. The fiber plate functions as a demarcation point for the incoming fiber drop and distributes it out to the customer.

AdobePDF.jpg read more (PDF)

FP01 Series - Single Port Fiber Adapter Plate

The FP01 Series are single port fiber adapter plates that snaps into the 169F, 506F and 507F Series fiber enclosures. The fiber plate functions as a demarcation point for the incoming fiber drop and distribution out to the customer.

AdobePDF.jpg read more (PDF)

509F - Fiber Interface Device / Slack Storage Unit

The 509F Fiber Interface Device provides demarcation between OSP and customer fiber drop, as well as slack storage for up to 75ft. of fiber. May be used as a standalone unit, or mated to the OD-ONT-ENC Outdoor ONT Enclosure (cover included). The 509F accommodates a fiber plate with multiple SC adapter options.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FET3 - Outdoor Fiber Demarcation Enclosure

The FET3 Outdoor Fiber Demarcation Enclosure is a compact unit which features connectivity between the OSP fiber drops and customer fiber drops. This weatherproof design is ideally suited for outdoor pole or wall mount installations and is configured for up to 24 patch and splice fiber terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WSE-144 - Wallmount Splice Enclosure

Indoor wall mount fiber optic splice enclosure to transition from OSP to premise optical cable. The WSE-144 provides storage and protection of fiber splices. The front door of the housing is a work surface that can support the weight of a fusion splicer.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WSE-288 - Wall Mount Splice Enclosure, 288 Single 864 Mass Fusion

Wall mount fiber optic splice enclosure to transition from OSP to premise optical cable. Designed to resist dirt, dust and water spray. High capacity with small footprint.

AdobePDF.jpg read more (PDF)

FDT Series - 24F-72F Outdoor Fiber Distribution Terminals

FDT Series Outdoor Fiber Distribution Terminals provide splicing connectivity to the OSP feeder fiber and an SC-APC point of demarcation for customer drop terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg FDT1 Installation Notes (PDF)
AdobePDF.jpg FDT2 Installation Notes (PDF)

FSD Series - Fiber Optic Splice Dome Enclosure

Tii's fiber optic splice domes are butt end splice closures equipped with Roxtec cable sealing technologies. Constructed of superior materials to withstand harsh outdoor environments, such as UV degradation, chemical exposure and cold temperatures to ensure continuous operation of high speed fiber networks. The seals in the ports of the lid prevent gas, water or humidity from entering the enclosure.

AdobePDF.jpg read more (PDF)

FDH1 Series - Fiber Distribution Hub

The FDH1 Series is a wall mount fiber distribution hub designed to support patching, splicing and optical splitting in one unit. The enclosure has 9 adapter panel positions allowing for a wide variety of patching and splitting combinations. Two compartments separate the network terminations from the distribution terminations and a single outer door.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FDH2 Series - Fiber Distribution Hub

The FDH2 Series is a wall mount fiber distribution hub designed to support patching, splicing and optical splitting in one unit. The enclosure has 13 adapter panel positions allowing for a wide variety of patching and splitting combinations. Two compartments separate the network terminations from the distribution terminations and a single outer door.

AdobePDF.jpg read more (PDF)

FET1 - Fiber Entrance Terminal

The FET1 is a compact enclosure designed to provide a demarcation and transition point between fiber drop cable and the customer premise fiber cable. Designed as an adapter plate for Tii's 169 Sealed Wire Terminal Enclosure, the unit can be factory installed with industry standard single, dual or quad fiber coupler(s). The internal fiber routing system allows for proper bend radius and slack storage of bend insensitive fiber.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FET2 - Fiber Entrance Terminal

The FET2 is a compact unit which features connectivity between the OSP fiber drop and customer fiber drop, as well as slack storage. The unit is configurable for single, dual, quad, six and 12 fiber terminations. The unit is available for slack storage applications and is able to store up to 75' of fiber.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

SHF Series - FET Preterminated Stubbed Housings

Fiber entrance terminal frames factory loaded with custom made fiber cable assembly.

AdobePDF.jpg read more (PDF)

Slim Patch Drop - Fiber Optic Distribution Assembly

The Slim-Patch Drop fiber distribution assembly is designed for small confined space installations. 2-12 fiber cable is factory terminated in the Slim-Patch for a simple, compact and rugged distribution point. The custom length pigtail can be fusion spliced in a pedestal or splice case saving valuable space at the distribution point.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

169F Series - Fiber Interface Device

The 169F Fiber Interface Device (FID) is a compact enclosure which is designed to provide a demarcation and transition point between fiber drop cable and the customer premise fiber cable. Designed as an adapter plate for the 169 Sealed Wire Terminal Enclosure, the unit can be factory installed with industry standard single, dual or quad fiber coupler(s). The internal fiber routing system allows for proper bend radius and slack storage of bend insensitive fiber.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

506F - Fiber Interface Device/Slack Storage Unit

The 506F Fiber Interface Device/Slack Storage Unit is a compact unit which provides demarcation between the OSP fiber drop and customer fiber drop, as well as slack storage. The 506F is configurable for up to twelve fibers adapters. This unit is available without SC adapters for slack storage applications and is able to store up to 50ft. of fiber.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)
AdobePDF.jpg Installation Notes (2) (PDF)
AdobePDF.jpg Installation Notes (3) (PDF)
AdobePDF.jpg Installation Notes (4) (PDF)

507F - Fiber Interface Device/Slack Storage Unit

The 507F Fiber Interface Device/Slack Storage Unit is a compact unit which features connectivity between the OSP fiber drop and customer fiber drop, as well as slack storage. This unit accomodates multiple sizes of LB fittings and allows for termination through conduit at the top and bottom of the unit.

AdobePDF.jpg read more (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2017 Tii Technologies Inc. All Rights Reserved