tii


 

Fiber - Wall Mount Enclosures


Tii's wall mount fiber distribution units are designed to support patching and splicing in one unit. Each enclosure has one or more 118 LGX compatible panel positions allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations and has a single outer door with optional key lock.

CCP6 Series - Fiber Optic Customer Connection Point

Serves as a single fiber connection/demarcation point and is typically used at the customer premise point-of-entry, or as the FTTH ONT access point. This unit is directly wall mountable, or may be mounted on to a single gang wiring box. Also offers an auxiliary SpeedStar port to provide an additional connection point for Coax, RJ-45 or RJ-11.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM02BT - Wall Mount Patch & Splice Fiber Enclosure - 2 Plate Capacity

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 2 adapter panel positions, allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM04BT - Wall Mount Patch & Splice Fiber Enclosure - 4 Plate Capacity

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 4 adapter panel positions, allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM08BT - Wall Mount Patch & Splice Fiber Enclosure - 8 Plate Capacity

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 8 adapter panel positions, allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM12BT - Wall Mount Patch & Splice Fiber Enclosure - 12 Plate Capacity

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 12 adapter panel positions, allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FMC Series - Structured Wire Flush Mount Closures

Tii Flush Mount Closures provide an ideal solution to centrally locate equipment used to deliver voice, data, video, audio or wireless services at the premise. Manufactured from high performance engineering thermoplastic that will not impede RF signals where wireless networks are deployed. Provides ease of installation and efficient organization of ONTs, battery back-up and residential gateways. Modular design and rear mounting pattern give a wide latitude for hardware locations with ample ventilation to keep equipment cool. 180 degree hinged cover allows for quick and easy access to network equipment which can be mounted in multiple locations by means of Velcro straps, shelving support clips and other cable management components (Accessory Kit FMC-A1).

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

CCP5 Series - Fiber Optic Customer Connection Point

The CCP5 serves as a single fiber connection/demarcation point and is typically used at the MDU point-of-entry or as the FTTH ONT access point. The unit is directly wall mountable, or may be mounted onto a Single Gang wiring box using an included Wallplate. These enclosures provide a secure location for slack storage and fiber connections.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WSE-144 - Wallmount Splice Enclosure

Indoor wall mount fiber optic splice enclosure to transition from OSP to premise optical cable. The WSE-144 provides storage and protection of fiber splices. The front door of the housing is a work surface that can support the weight of a fusion splicer.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FAT1 Series - Fiber Access Termination Unit

The FAT 1 Series is a compact, outdoor wall mount fiber termination and distribution enclosure. This unit is typically used as an Optical Demarcation Point.

AdobePDF.jpg read more (PDF)

FDT Series - 24F-72F Outdoor Fiber Distribution Terminals

FDT Series Outdoor Fiber Distribution Terminals provide splicing connectivity to the OSP feeder fiber and an SC-APC point of demarcation for customer drop terminations.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg FDT1 Installation Notes (PDF)
AdobePDF.jpg FDT2 Installation Notes (PDF)

WSE-288 - Wall Mount Splice Enclosure, 288 Single 864 Mass Fusion

Wall mount fiber optic splice enclosure to transition from OSP to premise optical cable. Designed to resist dirt, dust and water spray. High capacity with small footprint.

AdobePDF.jpg read more (PDF)

FSC Series - Fiber Optic Splitter Chassis

Singlemode PLC splitters are passive optical assemblies that split and combine signals in fiber networks. The 1RU panel is 19 and 23 inch rack and wall mountable.

AdobePDF.jpg read more (PDF)

24 Series BEHT - 25, 50 & 100 Pair Fiber Upgradable Building Entrance Terminals

Our 2400 Series 110 in/out are upgradable to fiber optic wall mount units, allowing you to future proof your networks. For copper applications, this unit is designed for use at the point of demarcation to safeguard communications equipment from damaging electrical surges that may get onto incoming lines.

AdobePDF.jpg read more (PDF)

CCP3 Series - Fiber Optic Customer Connection Point

The CCP3 Series are compact, indoor wall mount fiber termination and distribution enclosures. These units are typically used as MDU ONT access point, FTTH ONT access point as well as FTTD desktop access point.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

CCP2 Series - Fiber Optic Customer Connection Point

The CCP2 Series is a compact, indoor wall mount fiber termination and distribution enclosure. This unit is typically used as MDU point-of-entry or FTTH ONT access point.

AdobePDF.jpg read more (PDF)

CCP1 Series - Fiber Optic Customer Connection Point

The CCP1 Series is a compact, indoor wall mount fiber termination and dsitribution enclosure. This unit is typically used as MDU ONT access point, FTTH ONT access point as well as FTTD desktop access point.

AdobePDF.jpg read more (PDF)

FDH1 Series - Fiber Distribution Hub

The FDH1 Series is a wall mount fiber distribution hub designed to support patching, splicing and optical splitting in one unit. The enclosure has 9 adapter panel positions allowing for a wide variety of patching and splitting combinations. Two compartments separate the network terminations from the distribution terminations and a single outer door.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

FDH2 Series - Fiber Distribution Hub

The FDH2 Series is a wall mount fiber distribution hub designed to support patching, splicing and optical splitting in one unit. The enclosure has 13 adapter panel positions allowing for a wide variety of patching and splitting combinations. Two compartments separate the network terminations from the distribution terminations and a single outer door.

AdobePDF.jpg read more (PDF)

WM1PBF - Wall Mount Patch & Splice Fiber Enclosure

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 1 adapter panel position and accomodates a wide variety of fiber termination connector types.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM2PBF - Wall Mount Patch & Splice Fiber Enclosure

Wall mount 12 fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 2 adapter panel positions allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations and has a single outer door with optional key lock.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM4PBF - Wall Mount Patch & Splice Fiber Enclosure

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 4 adapter panel positions allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations and has a single outer door with optional key lock.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

WM8PBF - Wall Mount Patch & Splice Fiber Enclosure

Wall mount fiber distribution unit designed to support patching and splicing in one unit. The enclosure has 8 adapter panel positions allowing for a wide variety of fiber termination connector types. Two compartments separate the network terminations from the distribution terminations and has a single outer door with optional key lock.

AdobePDF.jpg read more (PDF)
AdobePDF.jpg Installation Notes (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2017 Tii Technologies Inc. All Rights Reserved