tii


 

Protector Modules


Tii-Porta Systems gas tube modules are dependable plug-in devices that guard sensitive communication and Data networks from dangerous voltage surges. They are available in solid-state and gas tubes, and in a variety of breakdown voltages from 7.5V to 400V.

93- 193- Series - 1-Pin and 5-Pin Gas Tube Overcurrent Protector Modules with PTCs

Tii 5-pin/1-pin Gas Tube with PTC modules are dependable plug-in devices that guard sensitive telecommunications systems from dangerous voltage surges. The three-element GDT with 4 Ohm (nominal resistance) PTCs provide both overvoltage and overcurrent protection. This prevents destructive line-to-line overvoltages and sneak currents from reaching valuable telecom equipment. The combination of GDT and PTCs provide excellent electrical protection while minimally affecting high frequency xDSL and ISDN signals. These modules include a heat activated fail-safe mechanism that provide additional protection against power crosses. Test points allow easy test access to the outside plant. The 193/93 Series modules utilize 4 Ohm (nominal resistance) PTCs with hold current of 120mA in excess of 3 hours. The PTCs are resettable and will automatically revert to low resistance when the cause of overcurrent is removed.

AdobePDF.jpg read more (PDF)

75- 175- Series - 1-Pin and 5-Pin Gas Tube Protector Modules

Tii gas tube modules are dependable plug-in devices that guard sensitive telecommunications systems from dangerous voltage surges. The gas tube utilizes a three-element design. This prevents destructive line-to-line over voltages, protecting PBXs and key systems in a way that conventional two-element gas tubes cannot. The modules include heat activated fail-safe mechanism that provides additional protection against power crosses. Test points allow easy test access to the outside plant.

AdobePDF.jpg read more (PDF)

LVP Series - Solid State Protector Modules

Ultra-low capacitance solid state protector modules that provide premium protection for sensitive data communication equipment to frequencies up to 250MHz. Ideal for Power Over Ethernet (POE) circuit protection using the 65 Volt module.

AdobePDF.jpg read more (PDF)

155BCN - Five-Pin / Single-Pin Cut-Through & Special Function Modules

These modules are cut-through, continuity only to bridge the Outside Plant (OSP) cable to the Central Office (CO) or Station equipment.

AdobePDF.jpg read more (PDF)

95- 195- Series - 1-Pin and 5-Pin Gas Tube Overcurrent Protector Modules with PTCs

1-pin/5-pin Gas Tube with PTC modules are dependable plug-in devices that guard sensitive telecommunications systems from dangerous voltage surges. The three-element GDT with 4 Ohm (nominal resistance) PTCs provide both overvoltage and overcurrent protection. This prevents destructive line-to-line overvoltages and sneak currents from reaching valuable telecom equipment. The combination of GDT and PTCs provide excellent electrical protection while minimally affecting high frequency xDSL and ISDN signals. These modules include a heat activated fail-safe mechanism that provide additional protection against power crosses. Test points allow easy test access to the outside plant. The 195/95 Series modules utilize 4 Ohm (nominal resistance) PTCs with hold current of 120mA in excess of 3 hours. The PTCs are resettable and will automatically revert to low resistance when the cause of overcurrent is removed.

AdobePDF.jpg read more (PDF)

103-105-3C1ES-N, 103-105-3C1FS-N - Solid State 240V and 300V Protector Modules

Tii's line of xDSL Solid State Protector Modules provides dependable protection for today's high speed communications networks. Balanced, ultralow capacitance, solid state circuitry minimizes noise and signal loss in high frequency networks. The modules protect sensitive circuitry by responding to surges in nanoseconds. Breakdown voltage is tightly controlled by clamping precisely and dependably even after long repeated use. An integral fail-safe mechanism permanently shorts the protector to ground in the presence of sustained overvoltage.

AdobePDF.jpg read more (PDF)

115 Series - 5-Pin Solid State Protector Modules

Tii-Porta Systems Solid State Protector Modules provide premium high-speed protection for sensitive communication equipment. Internal test points allow easy access to outside plant.

AdobePDF.jpg read more (PDF)

113 Series - 5-Pin Solid State Protector Modules

Tii-Porta Systems Solid State Protector Modules provide premium high-speed protection for sensitive communication equipment. Internal test points allow easy access to outside plant. These modules come with optional heat coil to guard against sneak current and overcurrent charge.

AdobePDF.jpg read more (PDF)

73- 173- Series - 1-Pin and 5-Pin Gas Tube Protector Modules

Tii gas tube modules are dependable plug-in devices that guard sensitive telecommunications systems from dangerous voltage surges. The gas tube utilizes a three-element design. This prevents destructive line-to-line over voltages, protecting PBXs and key systems in a way that conventional two element gas tubes cannot. These modules include heat activated fail-safe mechanism that provides additional protection against power crosses. Test points allow easy test access to the outside plant.

AdobePDF.jpg read more (PDF)

Delta Protector - Customer Premise - Line Protection for PBXs and Connectin Equipment

The Delta™ Protector provides premium, high-speed protection for sensitive communications and data equipment. The module of choice in high lightning areas, the Delta™ offers superior protection from overvoltages and overcurrents preventing costly damage to equipment.

AdobePDF.jpg read more (PDF)

About Tii

About Us



Follow Us On:

Facebook   Twitter   YouTube
Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon

Join our FREE Email Mailing List

For Email Newsletters you can trust
© 2017 Tii Technologies Inc. All Rights Reserved