Building Entrance Terminals
·
Install Note IF Series - Tii's Indoor Building Entrance Terminal is a network distribution point that protects and distributes central office cable pairs at the subscribers' premises..
·
Install Notes IM Series - IM Series BETs.
·
Install Note IHD Series - IHD Series BETs.
·
Install Note OF Series - Tii's Outdoor Building Entrance Terminal is a network distribution point that protects and distributes central office cable pairs at the subscribers' premises..
·
Install Notes OM Series - Tii’s OM Series Modular Outdoor BET and BET/NIDs serve as a network demarcation
and distribution point to protect and distribute central office cable pairs at the
subscribers’ premises. The modular designs allow maximum flexibility and easy
expansion..
·
Installation Notes 24 Series BET - 24 Series Trifold BETs.
·
Installation Notes 24 Series BET - 24 Series BETs with 66 or 110 Input, 66 or RJ Output.
CAT-5E and CAT-6 Network Protection
·
Installation Notes 61 Series - 61 CAT5E Termination Block.
Coax Protectors
·
Installation Notes 210 & 212 - In-Line® Coaxial Lightning Surge Protectors.
·
Installation Notes 220 - The 220, 75 Ohm Coaxial Shield Isolator prevents unwanted noise and picture interference on cable television signals..
·
Installation Notes 231 Series - 231 Series Coaxial Satellite Dish Surge Protectors.
DSL
·
Installation Notes 372S-12LP - xDSL POTS Splitter Module for VDSL2/ADSL2+, IPTV Services.
·
Installation Notes 80-800 - The 80-800 Indoor VDSL2 Balun is a passive in-line device designed to convert a VDSL2 signal carried on unbalanced 75 Ohm coax cable to a balanced twisted pair signal.
·
Installation Notes 761SM-12 - The 761SM-12 Wall Mount DSL Filter splits the combined voice and data signals carried
on telephone lines providing separate outputs for both phone and data services. The 761SM-12 utilizes Tii's proprietary gel filled IDC rockers for wire terninations..
·
Installation Notes 68M-2-1T - 68M-2-1T Sealed Wire Terminal.
·
Installation Notes 68M-12-1T - 68M-12-1T Sealed Wire Terminal.
·
Installation Notes 68M-1-1T - 68M-1-1T Sealed Wire Terminal.
·
Installation Notes 170 Series - 170 Series Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 751B - The 751B is a single line, indoor gel-sealed unit ideally suited for indoor telephone connections or demarcation applications..
·
Installation Notes WTB-025-C04 - The WTB-025-C04 Sealed Wire Terminal is designed for applications requiring 25 pair output with 24awg cable..
·
ISB MODULE Installation Notes ISB PLATE Installation Notes ISB - ISB Intercom System Bypass.
·
Installation Notes 97FB-S - 97FB-S VDSL POTS Splitter Module.
·
Installation Notes 372S-12 - 372S-12 xDSL POTS Splitter Module.
·
Installation Notes 80-100 - 80-100 Indoor DSL Filter.
·
Installation Notes 80-200 - 80-200 Indoor DSL Filter With Data Port.
·
Installation Notes 80-400 - 80-400 Indoor DSL Filter with Data Port.
·
Installation Notes 80-410V - 80-410V Indoor DSL POTS Splitter.
·
Installation Notes SCT-A - SCT-A Active Sealing Current Terminator.
·
Installation Notes 87-1 - 87-1 Sealed Customer Bridge Module.
·
Installation Notes 95S-1-09 - 95S-1-09 ADSL2+ POTS Splitter Module.
·
Installation Notes 95S-1-10 - Sealed Customer Bridge Module with DSL Compliant Half-Ringer.
·
Installation Notes 95S-1-11 - 95S Series ADSL POTS Splitter Module.
·
Installation Notes 95S-1-12 - 95S-1-12 DSL POTS Splitter Module splits the combined voice and data signals carried on telephone lines providing separate outputs for both phone and data services..
·
96-00 Installation Note 96-00-1 Installation Note 96-00-4 Installation Note 96-00-5 Installation Note 96 Series - xDSL POTS Splitter Module.
·
Installation Notes 97 Series - 97 Series VDSL/ADSL2+ POTS Splitter Module are passive devicse which split the combined voice and data signal carried on telephone lines to provide separate outputs for both phone and data services..
·
Installation Notes 97C-1-1-2 - The 97C-1-1-2 ADSL2+ POTS Splitter Module is a passive device which splits the combined voice and data signal carried on telephone lines to provide separate outputs for both phone and data services..
·
Installation Notes 712 Series - 712-99S-12.
·
Installation Notes 761-4T-12 - 761-4T-12 Series POTS Splitter.
·
Installation Notes UVS-12 - UVS-12 xDSL POTS Splitter.
Electronics
·
Install Notes 831E Install Notes 831W2 831 Series - 831 Series, filters, RFI.
·
Installation Notes 856E - 856E Half Ringer.
Fiber - Miscellaneous
·
Installation Notes FIT - FIT - Fiber Installation Tool.
Fiber - ONT Installation Accessories
·
Installation Notes OD-ONT-CAB - OD-ONT-CAB.
·
Installation Notes FMC Series - Structured Wire Flush Mount Closures.
·
OD-ONT-ENC Install Note OD-ONT-SSENC Install Note OD-ONT-SSC Install Note OD-ONT-ENC - Outdoor ONT Enclosure.
·
ONT-ENC Install Note ONT-SSENC1 Install Note ONT-ENC - Optical Network Terminal Enclosure.
·
Installation Notes ONT-SE1 - The ONT-SE1 is an indoor/outdoor slack storage enclosure which can accommodate
up to 50 ft. of flat drop fiber with adjustable fiber retention fingers. This unit ships with hardware necessary to mount several industry standard indoor and outdoor
ONTs on.
·
Installation Notes FAT1 Series - The FAT 1 Series outdoor wall mount fiber termination and distribution enclosure..
·
Installation Notes VIS-4 - VIS-4.
·
Installation Notes VIS-3 - VIS-3.
·
Installation Notes ONT-SS - The ONT-SS is designed to securely consolidate key fiber to the home components.
Its unique design offers a compact solution to install a wide variety of ONT’s,
routers and battery back-ups, onto a shelf at the customer premise where space is
often lim.
·
442 Series Grounding Modules Comparison Flyer 442CSE - 442CSE ONT Grounding Module for Coax Utilizing Two Prong Polarized AC Outlet.
·
Installation Notes VIS-2 - VIS-2 Voice Intercom Switch with Porting Switch.
Fiber - OSP Fiber Enclosures
·
Installation Notes FDH6 Series - FDH6 Series Modular FDH Pole/Pad Mount Enclosure.
·
Installation Notes HCCH-SC - HCCH-SC Modular FDH Enclosure.
·
Installation Notes 171F - 171F Fiber Transition Enclosure.
·
Installation Notes 509F - Fiber Interface Device/Slack Storage Unit.
·
Installation Notes FET3 - FET3 Outdoor Fiber Demarcation Enclosure.
·
Installation Notes WSE-144 - Indoor wall mount fiber optic splice enclosure to transition from OSP to premise
optical cable. The WSE-144 provides storage and protection of fiber splices. The front door of the housing is a work surface that can support the weight of a fusion splicer..
·
FDT1 Installation Notes FDT2 Installation Notes FDT Series - FDT Series Outdoor Fiber Distribution Terminals.
·
Installation Notes FDH1 Series - FDH1 Series Fiber Distribution Hub.
·
Installation Notes FET1 - Fiber Entrance Terminal.
·
Installation Notes FET2 - Fiber Entrance Terminal.
·
Installation Notes Slim Patch Drop - The Slim-Patch Drop fiber distribution assembly is designed for small confined space installations. 2-12 fiber cable is factory terminated in the Slim-Patch for a simple, compact and rugged distribution point..
·
Installation Notes 169F Series - 169F Fiber Interface Device.
Fiber - Rack Mount Enclosures
·
Installation Notes RM1U2S - Swingout Patch and Splice Panel.
·
Installation Notes RM2U6B - Rackmount Fiber Distribution Panel.
·
Installation Notes RM4UXB - RM4UXB Rackmount Fiber Distribution Panel.
·
Installation Notes RM1U2B - RM1U2B Rackmount Fiber Distribution Panel.
·
Installation Notes RM1U3B - RM1U3B Rackmount Fiber Distribution Panel.
·
Installation Notes RM2U4B - RM2U4B Rackmount Fiber Distribution Panel.
·
Installation Notes RM3U8B - RM3U8B Rackmount Fiber Distribution Panel.
Fiber - TSL Series Rack Mount Enclosures
·
RM3UWL Installation Note RM3UWLS Installation Note RM4UWL Installation Note RM4UWLS Installation Note TSL Series - TSL Series Patch & Splice Enclosures.
·
Installation Notes MAMU Series - MAMU Series Multi-Access Modular Unit.
Fiber - Wall Mount Enclosures
·
Installation Notes HCCH-SC - HCCH-SC Modular FDH Enclosure.
·
Installation Notes CCP7 Series - Fiber Optic ONT Customer Connection Point.
·
Installation Notes CCP6 Series - CCP6 Series Fiber Optic Customer Connection Point.
·
Installation Notes WM02BT - Wall Mount Patch & Splice Fiber Enclosure - 2 Plate Capacity.
·
Installation Notes WM04BT - Wall Mount Patch & Splice Fiber Enclosure - 4 Plate Capacity.
·
Installation Notes WM08BT - Wall Mount Patch & Splice Fiber Enclosure - 8 Plate Capacity.
·
Installation Notes WM12BT - Wall Mount Patch & Splice Fiber Enclosure - 12 Plate Capacity.
·
Installation Notes FMC Series - Structured Wire Flush Mount Closures.
·
Installation Notes CCP5 Series - CCP5 Fiber Optic Customer Connection Point.
·
Installation Notes WSE-144 - Indoor wall mount fiber optic splice enclosure to transition from OSP to premise
optical cable. The WSE-144 provides storage and protection of fiber splices. The front door of the housing is a work surface that can support the weight of a fusion splicer..
·
Installation Notes FAT1 Series - The FAT 1 Series outdoor wall mount fiber termination and distribution enclosure..
·
FDT1 Installation Notes FDT2 Installation Notes FDT Series - FDT Series Outdoor Fiber Distribution Terminals.
·
Installation Notes CCP3 Series - The CCP3 Series are compact, indoor wall mount fiber termination and distribution enclosures..
·
Installation Notes CCP2 Series - The CCP2 Series is a compact, indoor wall mount fiber termination and distribution enclosure..
·
Installation Notes FDH1 Series - FDH1 Series Fiber Distribution Hub.
·
Installation Notes WM1PBF - WM1PBF Wall Mount Patch & Splice Fiber Enclosure.
·
Installation Notes WM2PBF - WM2PBF Wall Mount Patch & Splice Fiber Enclosure.
·
Installation Notes WM4PBF - WM4PBF Wall Mount Patch & Splice Fiber Enclosure.
·
Installation Notes WM8PBF - WM8PBF.
Fiber Distribution Hub
·
Installation Notes FDH6 Series - FDH6 Series Modular FDH Pole/Pad Mount Enclosure.
·
Installation Notes Slim Patch Drop - The Slim-Patch Drop fiber distribution assembly is designed for small confined space installations. 2-12 fiber cable is factory terminated in the Slim-Patch for a simple, compact and rugged distribution point..
·
FDT1 Installation Notes FDT2 Installation Notes FDT Series - FDT Series Outdoor Fiber Distribution Terminals.
·
Installation Notes FDH1 Series - FDH1 Series Fiber Distribution Hub.
Home Networking
·
Installation Notes HomePlug Windows7 Installer HomePlug Vista Installer HNX-ET - Tii HNX-ET HomePlug® Turbo Ethernet Bridge.
·
Installation Notes HomePlug Windows7 Installer HomePlug Vista Installer HNP6L-ET - HNP6L-ET Combination Ethernet Turbo Adapter and Home Networking Protector.
Network Interface Device - NID
·
Installation Notes 751 - 751 Indoor Gel-Sealed Master Jack.
·
Installation Notes 320 NIZ, 325 NIZ, 326 NIZ & 126 NIZ - 320 NIZ, 325 NIZ, 326 NIZ and 126 NIZ Network Interfaces.
·
Install Notes 759 Install Notes 760 759 & 760 - 759 and 760 Network Interface Devices.
·
Installation Notes 763 - 763 Six-Line Indoor/Outdoor Network Interface Devices.
·
Installation Notes 3100 COCOT - 3100 COCOT.
·
Installation Notes 3600 - 3600 broadband outdoor Network Interface Device (NID).
·
Installation Notes 3700 - 3700 broadband outdoor Network Interface Device (NID).
·
Installation Notes 3800 - 3800 COCOT.
·
Installation Notes 5100 - Two Line Enhanced Indoor/Outdoor Network Interface Device.
·
Installation Notes 9600 - The 9600 broadband outdoor Network Interface Device (NID) is a versatile, twelve-pair housing..
·
Installation Notes 8925 - 8925 25 Pair Indoor Network Interface Device.
·
Installation Notes 85 - 85 - Sealed Subscriber Bridge with RJ-45 Test Receptacle.
·
Installation Notes 91 Series - 91 Series Expansion Modules.
·
Installation Notes 95 Series - 95 Series Customer Bridge Modules (CBMs).
·
Installation Notes 95S - 95S Sealed Customer Bridge Modules (CBM).
·
Installation Notes 95S-2 - 95S-2 Customer Bridge Module.
·
Installation Notes 96 Series - 96 Sealed Customer Bridge Modules (CBM).
Powerline Protection
·
Installation Notes 442 Series Grounding Modules Comparison 442 - 442 Grounding Module.
·
442 Series Grounding Modules Comparison 442CGT - The 442CGT Grounding Module detects the presence of AC power and ground, provides an auxiliary AC receptacle and ground connection. Two F-type female connectors provide means of grounding coax cable shield as well as signal integrity..
·
442 Series Grounding Modules Comparison Flyer 442CSE - 442CSE ONT Grounding Module for Coax Utilizing Two Prong Polarized AC Outlet.
·
Installation Notes EMC-240B - The Tii EMC-240B Surge Suppressors are designed to protect the remote terminal of a digital loop carrier or similar electronic equipment..
·
442 Series Grounding Modules Comparison Flyer 442C - 442C Grounding Module.
Station Protectors
·
Installation Notes 312 Series - The 312 Series Enclosure is molded of durable, weather-resistant thermoplastic.
Contains Gel-sealed IDC terminations (no special tools required), or screw drive
IDC connections with removable 5 pin connection/protection module. Terminates
wire gauges ..
·
Installation Notes 320, 321, 325, & 326 - 320, 321, 325 & 326 Totel Failsafe® TFS® Station Protectors.
·
Installation Notes 344, 345, 348 & 349 - 344, 345, 348 & 349 Station Protectors.
·
Installation Notes 347 Series - 347 Series Station Protectors.
Surge Arresters
·
Installation Notes 372S-4G - Gigabit Ethernet Surge Protection Module.
·
Installation Notes AD-01W-FS - Angle Driver AD-01W-FS - DSL Compliant Sealed Station Protector.
·
Installation Notes AD-02W-FS - Angle Driver AD-02W-FS DSL-Compliant Sealed Station Protector.
·
Installation Notes AD-03W-FS - AD-03W-FS.
·
Installation Notes AD-M2-W-FS - AD-M2-W-FS DSL Compliant Sealed Station Protector.
·
Installation Notes AD-01W-LP - Micro Angle Driver AD-01W-LP DSL Compliant Sealed Surge Arrester.
·
Install Notes ELP-1 Install Notes ELP-2 ELP - .
·
Installation Notes 122 - 122 Primary Surge Arrester Module.
·
Installation Notes 126 - 126 Heavy Duty Totel Failsafe Station Protector.
·
Installation Notes 127M - 127M Heavy Duty Station Protector.
·
Installation Notes 317 - Three-Electrode Maximum Duty Gas Tube Surge Arrester.
·
Installation Notes 355M - 355M Maximum Duty Totel Failsafe Station Protector.
·
Installation Notes 356 - 356 Heavy Duty Totel Failsafe Station Protector.
·
Installation Notes 372-S2 - 372-S2 100 Base-T Surge Protection Module.
VoIP
·
Installation Notes VIS-2 - VIS-2 Voice Intercom Switch with Porting Switch.
·
Installation Notes 68M-2-1T - 68M-2-1T Sealed Wire Terminal.
·
Installation Notes 68M-12-1T - 68M-12-1T Sealed Wire Terminal.
·
Installation Notes 68M-1-1T - 68M-1-1T Sealed Wire Terminal.
·
Installation Notes 751B - The 751B is a single line, indoor gel-sealed unit ideally suited for indoor telephone connections or demarcation applications..
·
Installation Notes WTB-025-C04 - The WTB-025-C04 Sealed Wire Terminal is designed for applications requiring 25 pair output with 24awg cable..
·
Installation Notes 69T Series - 69T Series Sealed Wire Terminal.
·
Installation Notes 78 - 78 Dual Service Provider Switch.
·
Installation Notes 79 - 79.
·
Installation Notes SVM - Switchable Voice Module.
·
Installation Notes SVMWT - The Tii Switchable Voice Module (SVMWT) provides seamless switching from Telco service to digital phone service..
·
Installation Notes SVM-1R-P - SVM-1R-P.
·
SVM-2 Installation Notes SVM-4 Installation Notes SVM-2-P, SVM-4-P - SVM-2-P,SVM-4-P Switchable Voice Module (SVM).
·
Installation Notes SVN - .
·
Installation Notes SVN-12 - .
·
Installation Notes VIS-3 - VIS-3.
·
Installation Notes VIS-4 - VIS-4.
·
Installation Notes 89 - 89 Module.
·
Installation Notes 162T Series - 162T Series Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 164-2 - 164-2 Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 170 Series - 170 Series Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 67 - 67 Sealed Wire Terminal.
·
Installation Notes 68 Series - 68 Series Sealed Wire Terminal.
·
Installation Notes 69T-2S - 69T-2S Sealed Wire Terminal.
·
Installation Notes SVWJ - SVWJ.
·
Installation Notes 761M Series - 761 M Series Flush Mount Indoor Phone Jack Plate.
Wire Terminals
·
Installation Notes 170 Series - 170 Series Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 162T Series - 162T Series Outdoor Sealed Wire Terminal Enclosure.
·
Installation Notes 751B - The 751B is a single line, indoor gel-sealed unit ideally suited for indoor telephone connections or demarcation applications..
·
Installation Notes WTB-025-C04 - The WTB-025-C04 Sealed Wire Terminal is designed for applications requiring 25 pair output with 24awg cable..
·
Installation Notes DVC-4 - DVC-4 Four Line Digital Voice Connector.
·
Installation Notes AIC-400-33 | AIC-600-29 - AIC-600-29, AIC-400-33.
·
Installation Notes 605-5 - 605-5 Twenty-Five Pair Aerial Terminal.
·
Installation Notes 605-50 - 605-50 Fifty Pair Aerial Terminal.
·
Installation Notes 761T Series - 761T Series Flush Mount Indoor Phone Jack Plate.
·
Installation Notes 163 Series - 163 Series Wire Terminal Enclosures.
·
Installation Notes 166 Series - 166 Series Wire Terminal Enclosure.
·
Installation Notes Installation Notes (2) ADX-FL-W - ADX-FL-W Sealed Cross-Connect Fuse Link Module.
·
Installation Notes ADX-W - ADX-W Sealed Unprotected Cross-Connect Module.
·
Installation Notes 61 Series - 61 CAT5E Termination Block.
·
Installation Notes 67-2-18 - 67-2-18 Sealed Wire Terminal.
·
Installation Notes 68M-1-1T - 68M-1-1T Sealed Wire Terminal.
·
Installation Notes 68M-2-1T - 68M-2-1T Sealed Wire Terminal.
·
Installation Notes 68M-12-1T - 68M-12-1T Sealed Wire Terminal.
·
Installation Notes 90 Series - 90 Series Bridging Modules.
